Breaker Bars
Ultimate Breaker Bars:
UTDBB1/2:
1/2″ Drive breaker 760mm bar with spring loaded ball bearing that hold socket securely
UTDBB3/4:
3/4″ Drive breaker 1000mm bar with spring loaded ball bearing that hold socket securely
UTDBB1:
1″ Drive breaker 1000mm bar with spring loaded ball bearing that hold socket securely
Custom size Reaction Arms also available. Please contact us with required dimensions
Ph: 07 55805492
@: sales@ultimatetools.com.au
AIR MANIFOLD TX-3AMF-TNK
Keeps the work site uncluttered by using only one hose to power up to 4 tools at once. Equipped with a gauge to monitor working pressure and a 200 psi pop-off valve to prevent excessive pressure build-up. Easily bolts to skids or other surfaces and multiple manifolds can be used in tandem.
NUMBER OF OUTLETS 4
CAPACITY 2.5G
WORKING PRESSURE 200PSI
TANK DIAMETER 8″
HEIGHT 10″”
LENGTH 23″
WEIGHT 10KG
Features: Bi-directional 360deg rotation universal joint keeps air hoses straight and untwisted.
ULTIMATE PLIERS DISPLAY SET
TS3937 – 8″ COMBINATION PLIER
TS3944 – 8″ LONG NOSE PLIER
TS3975 – SIDE CUTTER
All pneumatic tools require some oil in the air line to lubricate the inner moving parts and reduce the wear between them, cooling them and reducing friction. Percussion units (breakers, hammers) without oil cause strong wear on the piston and cylinder. Decades ago, compressors leaked so much oil that it was enough to lubricate hammers and breakers. But that does not happen anymore.
Breaker & Hammer Air-Oil is a fully synthetic lubricant with excellent lubricating, rust-preventing and de-icing properties, especially developed for TEX pneumatic breakers and hammers, as well as DIP and DOP pumps, for a smooth continuous operation under extreme conditions.
CLICK HERE FOR LIST OF ALL LUBRICANTS
X-LITE flat hoses
Pre-mounted with claw couplings & hose clamps
Key Benefits
- Is extremely flexible an easy to roll
- Low weight – three times less than traditional hoses
- Takes only a fifth of the space
- Woven reinforcement which interlocks and achieves a very high burst pressure and tensile strength (end pull)
3/8 Brass Inline Oiler
- Automatically lubricates your pneumatic tooling ensuring optimum performance and life span
- Manufactured from Brass and plastic keeping weight light whilst still maintaining a strong construction
In-Line Air Filters:
Features: Protects air tools from rust, scale and dirt. Reduces the risk of expensive repairs
and increases tool life.
Features a 40 micron sintered
bronze filter element
Model No. Inlet Size Outlet Size Length
9072 1/4”FPT 1/4”MPT 60MM
9073 3/8”FPT 3/8”MPT 60MM
9074M 1/2”FPT 1/2”MPT 80MM
9076M 3/4”FPT 3/4”MPT 80MM
9074 1/2”FPT 1/2”FPT 80MM
9076 3/4”FPT 3/4”FPT 80MM
The Claw couplings from Atlas Copco are made of zinc-plated, dropforged, hardened steel and always comes with an oil resistant hose ring ensuring long life even under difficult conditions. The coupling head is the same for all hose sizes and can therefore be freely combined. These are suitable for large grinders, other high flow demand tools and indoor as well outdoor use, even below freezing point.
Benefits
-
Increased efficiency
-
Reduces air consumption
-
Increased lifetime and reliability
-
Reduced safety risks
CLICK HERE FOR A FULL LIST OF AIR FITTINGS
Portable Air Line Lubricators:
Features: Designed to supply oil to air tools where it is not practical to use stationary lubricators.
Can be installed up to 25ft away. Features adjustable oil flow, visible oil supply and rugged casting
for use in severe conditions.
Model No. Oil Capacity Pipe Size Rec’d Flow Max. PSI Length Height Weight
0-R 1.4oz. ½” 30cfm 500 110mm 55mm 400g
1-R 3.7oz. 3/4” 70cfm 260 152mm 60mm 680g
2-R 11.0oz. 3/4” 70cfm 300 177mm 87mm. 907g
2A-R 11.0oz. 1” 70cfm 300 177mm 87mm 907g
3-R 16.0oz. 1” 150cfm 250 254mm 92mm 1kg