3/4″ FILTER REGULATOR / LUBRICATOR WITH STAND
0-200PSI MAX PRESSURE
Comes mounted to carry brace / stand
Length……. 370mm
Height……. 400mm
Weight…… 8kg
Related products
-
Features: Bi-directional 360deg rotation universal joint keeps air hoses straight and untwisted.
Send Enquiry -
ULTIMATE PLIERS DISPLAY SET
TS3937 – 8″ COMBINATION PLIER
TS3944 – 8″ LONG NOSE PLIER
TS3975 – SIDE CUTTER
Send Enquiry -
UTDBDP
1200MM x 20MM Blow Pipe
Great for use of cleaning debris in large areas with ease in places such as warehouses, trucks etc.
Send Enquiry -
Features: Help prevent injury due to broken hose connections
- Suits up to 3/4″hose diameter
Suitable for underground use
Send Enquiry -
X-LITE flat hoses
Pre-mounted with claw couplings & hose clamps
Key Benefits
- Is extremely flexible an easy to roll
- Low weight – three times less than traditional hoses
- Takes only a fifth of the space
- Woven reinforcement which interlocks and achieves a very high burst pressure and tensile strength (end pull)
Send Enquiry -
Ultimate Breaker Bars:
UTDBB1/2:
1/2″ Drive breaker 760mm bar with spring loaded ball bearing that hold socket securely
UTDBB3/4:
3/4″ Drive breaker 1000mm bar with spring loaded ball bearing that hold socket securely
UTDBB1:
1″ Drive breaker 1000mm bar with spring loaded ball bearing that hold socket securely
Send Enquiry -
In-Line Air Filters:
Features: Protects air tools from rust, scale and dirt. Reduces the risk of expensive repairs
and increases tool life.Features a 40 micron sintered
bronze filter elementModel No. Inlet Size Outlet Size Length
9072 1/4”FPT 1/4”MPT 60MM
9073 3/8”FPT 3/8”MPT 60MM
9074M 1/2”FPT 1/2”MPT 80MM
9076M 3/4”FPT 3/4”MPT 80MM
9074 1/2”FPT 1/2”FPT 80MM
9076 3/4”FPT 3/4”FPT 80MM
Send Enquiry -
Features: This lightweight long nose Air Blower is designed for cars, trucks and the marine industry.
Send Enquiry -
All pneumatic tools require some oil in the air line to lubricate the inner moving parts and reduce the wear between them, cooling them and reducing friction. Percussion units (breakers, hammers) without oil cause strong wear on the piston and cylinder. Decades ago, compressors leaked so much oil that it was enough to lubricate hammers and breakers. But that does not happen anymore.
Breaker & Hammer Air-Oil is a fully synthetic lubricant with excellent lubricating, rust-preventing and de-icing properties, especially developed for TEX pneumatic breakers and hammers, as well as DIP and DOP pumps, for a smooth continuous operation under extreme conditions.
CLICK HERE FOR LIST OF ALL LUBRICANTS
Send Enquiry -
AIR MANIFOLD TX-3AMF-TNK
Keeps the work site uncluttered by using only one hose to power up to 4 tools at once. Equipped with a gauge to monitor working pressure and a 200 psi pop-off valve to prevent excessive pressure build-up. Easily bolts to skids or other surfaces and multiple manifolds can be used in tandem.
NUMBER OF OUTLETS 4
CAPACITY 2.5G
WORKING PRESSURE 200PSI
TANK DIAMETER 8″
HEIGHT 10″”
LENGTH 23″
WEIGHT 10KG
Send Enquiry
