9PCE 1/2″ Drive “SAE” In-Hex Set Sizes:
3/16, 7/32, 1/4, 9/32, 5/16, 3/8, 1/2, 9/16 & 5/8″
Allows a larger drive socket to be utilised by stepping down the drive size and a magnetic base to retain insert.
Note: Pin hole retaining not available, due to the mixing of drive sizes.
Part No:
TH12X34………………………..1/2″ X 3/4″
TH34X1………………………….3/4″ X 1″
TH1X112………………………..1″ X 1-1/2″”
3/16, 7/32, 1/4, 9/32, 5/16, 3/8, 1/2, 9/16 & 5/8″
7/16, 1/2, 9/16, 5/8,11/16,3/4, 13/16, 7/8, 15/16 & 1″
1, 1-1/16, 1-1/8, 1-1/4, 1-5/16, 1-3/8, 1-7/16 & 1-1/2″
Part No
|
|
61550041
61550038 61540035 |
1′ DRIVE 41MM X 21MM(SQUARE) COMBINATION BUDD WHEEL
61550038 1′ DRIVE 38MM X 19MM(SQUARE) COMBINATION BUDD WHEEL 3/4D 35MM X 17 (SQUARE), COMBINATION BUDD |
61540041 | 3/4D 21SQX41HEX, COMBINATION BUDD |
63045017 | 3/4D 17MM SKT, 4-POINT |
63045019 | 3/4D 19MM SKT, 4-POINT |
63045020 | 3/4D 20MM SKT, 4-POINT |
63045021 | 3/4D 21MM SKT, 4-POINT |
7/16, 1/2, 9/16, 5/8,11/16,3/4, 13/16, 7/8, 15/16 & 1″
10, 11, 12, 13, 14, 17, 19, 21, 22 & 24mm
The one piece Retaining Ring also known as the RET RING was deigned by professionals to prevent serious injury and down time caused by the more common two piece socket retention system. The Ret Ring is the solution for safer retention of Impact Sockets.
Suitable for use at rotational speeds of up to 5000RPM
PART NO |
RET INSIDE DIA |
3/4DR |
|
RR10005S | 1-1/4″ |
RR10032S | 1-7/16″ |
RR00034S | 1-5/8″ |
RR18708S | 1-3/4″ |
RR18710S | 2″ |
RR18715S | 2-1/8″ |
RR18716S | 2-1/4″ |
1DR |
|
RR10008S | 1-3/4″ |
RR10010S | 2″ |
RR10015S | 2-1/8″ |
RR10016S | 2-1/4″ |
RR10017S | 2-1/2″ |
RR10019S | 2-5/8″ |
1-1/2DR |
|
RR10020S | 2-7/8″ |
RR10025S | 3-3/8″ |
RR10030S | 3-7/8″ |
RR10035S | 4-3/8″ |
27, 30, 32, 33, 36, 38, 40, 41, 42, 46, 50, 55, 60, 65mm