TS38R – 3/8″D Socket Rail

TS12R – 1/2″D Socket Rail

TS34R – 3/4″D Socket Rail

The Claw couplings from Atlas Copco are made of zinc-plated, dropforged, hardened steel and always comes with an oil resistant hose ring ensuring long life even under difficult conditions. The coupling head is the same for all hose sizes and can therefore be freely combined. These are suitable for large grinders, other high flow demand tools and indoor as well outdoor use, even below freezing point.

Benefits

• Increased efficiency

• Reduces air consumption

• Increased lifetime and reliability

• Reduced safety risks

CLICK HERE FOR A FULL LIST OF AIR FITTINGS

Key Benefits 

• Is extremely flexible an easy to roll
• Low weight – three times less than traditional hoses
• Takes only a fifth of the space
• Woven reinforcement which interlocks and achieves a very high burst pressure and tensile strength (end pull)

TS3408-C – 290 x 133 x 75

TS31210-C – 372 x 100 x 60

TS10-C – 355 x 113 x 65

In-Line Air Filters:

Features: Protects air tools from rust, scale and dirt. Reduces the risk of expensive repairs
and increases tool life.

Features a 40 micron sintered
bronze filter element

Model No.     Inlet Size       Outlet Size        Length

9072                 1/4”FPT       1/4”MPT         60MM

9073                3/8”FPT       3/8”MPT         60MM

9074M            1/2”FPT         1/2”MPT         80MM

9076M           3/4”FPT         3/4”MPT         80MM

9074                1/2”FPT           1/2”FPT        80MM

9076               3/4”FPT           3/4”FPT        80MM

AIR MANIFOLD TX-3AMF-TNK

Keeps the work site uncluttered by using only one hose to power up to 4 tools at once. Equipped with a gauge to monitor working pressure and a 200 psi pop-off valve to prevent excessive pressure build-up. Easily bolts to skids or other surfaces and multiple manifolds can be used in tandem.

NUMBER OF OUTLETS   4

CAPACITY   2.5G

WORKING PRESSURE  200PSI

TANK DIAMETER 8″

HEIGHT 10″”

LENGTH 23″

WEIGHT 10KG